0086-531-82687977      sales@lifttester.com
You are here: Home » Applications » Crane » Dynamic Stiffness » Muti-function crane performance tester CTI-A

CONTACT US

Tel: 0086-531-82687977
Email: sales@lifttester.com
Fax: 0086-531-82687744
Share to:

Muti-function crane performance tester CTI-A

It is used for the measurement of the brake slip of crane hoisting mechanism; deflection, resilience, camber, dynamic stiffness of the crane girder; the speed and acceleration of crane and crab/trolley; Crane hydraulic cylinder inspection.

Quantity:
  • CTI-A
  • YUXI

Description

   It is used for the measurement of the brake slip of crane hoisting mechanism; deflection, resilience, camber, dynamic stiffness of the crane girder; the speed and acceleration of crane and crab/trolley; Crane hydraulic cylinder inspection.

It can also be used to measure the travelling speed and braking distance of other large equipment moving parts, as well as testing deformation of large-sized objects.


Functions

  • The entire system requires only one digital control terminal to complete all operations.

  • All the measurement items are transmitted through Bluetooth or wire.

  • The test results are directly displayed on the digital terminal.

  • Intelligent curve analysis allows manual comparison of measurement results.

  • The system can save unlimited sets of test data over the years.

  • Intelligent analysis of possible risks of crane operation through changes in data.

  • The brake slip can be measured at any angle below the crane, which fully guarantees the safety of operators and measuring instruments.

  • No need to install the target and mark on the measured object to complete the deflection measurement.

  • The instrument adopts telephoto imaging system, which can observe the measured target from a long distance.

  • Speed measurement function: it can measure the lifting speed of the crane lifting mechanism.

  • No wiring on site, no crane control circuit required, greatly reducing the difficulty and intensity of work and increasing safety.

  • Linear motion speed measurement.

  • Measurement information is automatically collected by the instrument, no manual input required.

  • The instrument uses a high-precision absolute encoder to ensure measurement at any angle without affecting the accuracy of the measurement.

  • The instrument uses a high-precision, high-frequency rangefinder to ensure the accuracy and real-time of the ranging data.

  • Adopt dedicated intelligent digital terminal for data collection and data processing, friendly user interface and simple operation

  • The host is composed of a ranging sensor and a theodolite installed on the base.

 

Parameters

  • Battery: DC 12V Built-in lithium battery

  • Angular accuracy: 2”

  • Liquid-electric compensation accuracy: 1s

  • Liquid-electric compensation range: ±4ˊ

  • Angle measuring mode: Absolute encoding.

  • Ranging deviation: 0.5-20m

  • Ranging: 0.5-500m

  • Frequency: 25Hz

  • Telescope magnification: 30X

  • Objective aperture: 45mm

  • Tube length: 157mm

  • Plate level: 30”/2mm

  • Circular level: 8”/2mm

 

  •  Brake slip            :  Range: >100m              Deviation: ≤2mm

  •  Deflection :  Range: >100m              Deviation: ≤ 0.5mm

  •  Camber      :  Range: >100m               Deviation: ≤ 0.5mm

  •  Speed        :  Range: 0-200m/min        Accuracy: ≤1%

  • Dynamic stiffness:  Range: 0.5-20Hz,  Resolution: 0.01Hz

                                        Maximum single measurement time: 60s

                                        Wireless transmission distance: 0-500m (Open space)

  • Hydraulic cylinder:     Range:0-13.7mm        Resolution:0.01mm

  • Acceleration:              Range: ±2g                 Accuracy: ≤2%               Resolution: 1mg


ABOUT US

Our company serves the well-known Special equipment testing institutions; lift and escalator manufacturers; lift,escalator and crane installation and maintain companies all the year round. 

APPLICATION

CONTACT US

  Add : Building A, International Business Center, Environmental science technology Park, High-tech Zone, Jinan, China
  Tel : 0086-531-82687977
  E-mail : sales@lifttester.com
  Fax : 0086-531-82687744
Copyright  2020  Shandong Yuxi Instruments Co., Ltd.  Sitemap